•     

SERVICE

POSSIBLE FAILURES AND REMOVAL 

  1. If your gun does not throw the burst cartridge.
    1. Probably cartridge pressure is weak, out of standart, change your cartridges.
    2. Dimensions of cartridge are faulty according to international standarts, change your cartridges.
    3. Extractor and pins might be broken, servicing is required. 
    4. Ejector might be broken, servicing is required.
    5. Clean and lubricate your gun and try again. 
  2. If Your gun goes to safety position while you are firing full auto mode. 
    1. Probably cartridge pressure is high, out of standart, change your cartridges.
    2. A part might be stuck in the barrel, change your cartridges, clean the barrel.
  3. If cock pounding sound is coming but do not burst cartridge.
    1. Capsules might be faulty on cartridges, change your cartridges.
    2. A piece of dirt might be stuck in the barrel breech, clean it with brush.
    3. The firing pin might be stuck due to too much shooting, servicing is required.
    4. Any part of the gun malfunctioned, may need a servicing.
  4. If unburst cartridge stays in the barrel and can not be inserted into the cartridge house, or two cartridges are pushing each other.
    1. Probably cartridge pressure is high, change your cartridges. 
    2. A part might be stuck in the barrel, change your cartridges, clean the barrel.
    3. The magazine may have been contaminated or deformed arjör kirlenmiş veya deforme olmuş olabilir, clean and lubricate the magazine completely, otherwise change it.
    4. Your gun shoot lifes could expanded, may need a servicing.
  5. If cartridge is not inserted into cartridge house.
    1. A part might be stuck in the barrel, clean the barrel. 
    2. Dimensions of cartridge are out of standarts, change your cartridges.
    3. Your gun shoot lifes could expanded, may need a servicing.
  6. If your gun does not accept the cartridge into the cartridge house and bypassing.
    1. Dimensions of cartridge are faulty or there might be burr residues, change your cartridges. 
    2. Magazine spring might be deformed, change your magazine. 
    3. Your magazine might be contaminated, clean and lubricate it.